How to Make a Borrow Board

Borrow Board

Tools Needed

Miter Saw​– I’d recommend a 12 inch sliding, miter saw.
Table Saw – I recommend Rigid or Ryobi saws.
Drill​– I use R​yobi drills.​
Nail Gun (you could use hammer and nails instead)
Tape Measure, Ruler, Pencil
Orbital Sander​– Ryobi makes a nice one.
Clamps​– Clamps are helpful for any project. I love to use JackClamps
Speed Square

Supplies Needed

2 foot by 4 foot white board handy panel (available at Home Depot)
1×4 boards
Wood Glue – I recommend Gorilla Glue
Sandpaper, 1 1/4 inch Kreg Screws, Nails

PLANS AND COMPLETE POST WILL BE AVAILABLE SATURDAY.